FACADE AND ROOF CLEANING

Facade and roof
cleaning

Let your property stand out again.

We provide professional cleaning of facades, roofs and exterior surfaces for commercial and private properties. The method is selected according to the material, condition, level of dirt and safe access to the building.

Surface-appropriate method The cleaning method is adapted to the material
Safe execution The work is planned around access and building conditions
Visible result Cleaned surfaces are checked after completion
Facade and roof cleaning
Cleaning selected for the surface Facades, roofs and exterior surfaces

SCOPE OF SERVICE

What facade and roof cleaning may include

We always adapt the scope to the material, technical condition and type of soiling. A suitable method is therefore selected only after assessing the specific facade or roof surface.

Cleaning facade surfaces

Removal of common atmospheric and operational dirt from render, cladding and other suitable exterior surfaces.

  • Mineral, silicone and other facade renders
  • Washable cladding and exterior surfaces
  • A method selected according to material resistance

Cleaning roof surfaces

Care for suitable roofing materials while considering their age, condition, pitch and the requirements for safe access.

  • Concrete and clay roof tiles
  • Selected metal and other washable surfaces
  • Assessment of the roofing before work begins

Organic deposits

Removal of moss, algae, lichen and other organic dirt using a method suitable for the specific surface.

  • Local or widespread biological soiling
  • Treatment of heavily affected areas
  • A careful method based on the condition of the surface

Dust and atmospheric dirt

Cleaning deposits caused by traffic, the surrounding environment, weather conditions and long-term use.

  • Dust and common outdoor deposits
  • Marks caused by rainwater and water run-off
  • Dirt on buildings located near roads

Plinths, entrances and lower areas

Thorough cleaning of heavily exposed areas affected by splashing water, dust and activity around the building.

  • Lower and plinth sections of facades
  • Entrance areas and ground-floor surfaces
  • Local cleaning of heavily soiled areas

Subsequent protective treatment

Suitable surfaces may receive additional treatment after cleaning, depending on the material, condition and required result.

  • Biocidal treatment by agreement
  • Water-repellent treatment for suitable surfaces
  • Recommendations based on the specific material
Not every surface can be cleaned using the same method Water pressure, cleaning products and the overall process are selected according to the material and technical condition of the building. Sensitive or older surfaces may require a gentler method than conventional high-pressure cleaning.

SELECTING THE RIGHT METHOD

How we select the cleaning method

The appropriate method depends on the material, technical condition, type of soiling and possibilities for safe access. We therefore prepare the cleaning process individually for each building.

01

Assessment of the building

We first identify the type of surface, its age, current condition, extent of soiling and accessibility of individual areas.

  • Facade material or type of roofing
  • Cracks, damage and sensitive areas
  • Surroundings and access possibilities
02

Selection of the method and products

Based on the surface and type of dirt, we select a suitable combination of mechanical action, water and cleaning products.

  • Setting an appropriate working pressure
  • Selection of a suitable cleaning product
  • A gentler method for sensitive surfaces
03

Testing on a smaller area

For sensitive, older or unknown surfaces, the proposed method can first be tested on a less visible area.

  • Checking how the material responds
  • Verifying the effectiveness of the method
  • Adjusting the settings before full cleaning
04

Cleaning and final inspection

We carry out the agreed work while continuously checking the condition of the surface and the cleaning result.

  • Work organised around the building's operation
  • Protection of surrounding and sensitive areas
  • Final inspection of the completed work
Factors that influence the cleaning process We consider both technical and operational conditions in advance.
Type and resistance of the surface
Type and age of the soiling
Height, pitch and complexity
Access to the building
Windows, vegetation and surrounding areas
Weather and planned date
High pressure is not automatically the best solution Excessive cleaning pressure can damage the finish or underlying material of some surfaces. We therefore select a method that is effective while remaining appropriate for the surface.

SUITABLE BUILDINGS AND SITUATIONS

When facade and roof cleaning makes sense

We adapt the service to both smaller and larger buildings. The decisive factors are the type and condition of the surface, accessibility and the nature of the dirt that needs to be removed.

Office and commercial buildings

Facades of office buildings, business premises, retail units and other properties where appearance is important.

Commercial properties

Apartment blocks and residential properties

Cleaning facades, lower sections and suitable roof surfaces of apartment buildings and residential developments.

Residential properties

Industrial, warehouse and operational premises

Exterior surfaces of production halls, warehouses, technical buildings and other premises exposed to dust and operational dirt.

Industrial and technical buildings

Family homes and smaller properties

Facades, lower sections and suitable roofing on family homes, villas, smaller business premises and detached buildings.

Smaller and private properties

When algae, moss or lichen appears

Cleaning is suitable when visible biological soiling develops, particularly on shaded or damp parts of a building.

Organic soiling

Before painting or renovation

Cleaning can form part of the preparation before repainting, repairs or another treatment, provided the surface condition makes this appropriate.

Preparation before renovation
We first need to assess the specific condition of the building For an initial assessment, send us photographs, the approximate surface area, the property address and a description of the soiling. For larger or more complex projects, we will arrange a site visit.

PRACTICAL INFORMATION

Frequently asked questions about facade and roof cleaning

Every building requires an individual assessment. Before the work begins, we check the surface condition, access possibilities, surrounding area and the conditions required for safe completion.

How do you determine which cleaning method is suitable?

We assess the type of material, its technical condition, age, extent of soiling and accessibility of individual areas. For larger or more sensitive surfaces, we recommend a site visit. When the surface is unknown, the method can first be tested on a smaller and less visible area.

Do you always use high-pressure cleaning?

No. High pressure is not suitable for every material and could damage the surface finish or underlying material. Water pressure, temperature, cleaning products and mechanical action are selected according to the specific facade or roofing.

Can moss, algae and lichen be removed?

Organic deposits can be removed from suitable surfaces using mechanical cleaning and products intended for the specific type of soiling. The result depends on the condition of the surface, extent of the growth and how long it has been present. Additional treatment may be recommended for suitable materials.

How do you access the higher parts of the building?

The access method depends on the height and complexity of the building, the surrounding space and the scope of work. Depending on the situation, ladders, scaffolding, a mobile platform or another suitable method may be used. The required technical solution is included in the quotation after the building has been assessed.

Does the weather affect the work?

Yes. Strong wind, rain, frost or unsuitable temperatures can affect working safety, the effectiveness of cleaning products and surface drying. We therefore plan the work according to the weather forecast and the requirements of the selected cleaning method.

How is the price determined?

The price depends on the total area and complexity, surface material, level of soiling, building height, access possibilities, technical equipment required and any subsequent treatment. After receiving the necessary information or inspecting the building, we prepare a quotation with a clearly defined scope.

Need a quotation for facade or roof cleaning? Send us the property address, approximate surface area, photographs and a brief description of the soiling. We will assess the information and recommend the next steps.
RR Cleaning